thanks
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Graham
Singleton
Sent: Saturday, August 02, 2008 08:36
Subject: Re: Europa-List: Wing incidence
<grahamsingleton@btinternet.com>
William
yes it is correct, BUT, they need to be the same at two thirds span, ie
roughly where the flap ends. Any difference here or further out will
cause a roll bias.
So, check the second wing at the tip of the flap against the incidence
of the first wing at the same point. Now if there is any difference in
twist of the wings it won't matter so much.
Graham
Checked by AVG.
18:59
|