Hi all,
I've been double checking my tailplanes prior to putting the top on and found
some
discrepencies from my orginal measure measurements of 5 deg. down and 13 deg
up. I assume this is from the upgrade to mod 70. Sure thought I had it adjusted,
but glad I checked.
So, instead of the above, I have 5.7 deg down and 11.2 deg up. Maybe someone out
there can save me some head scratching and a whole lot of hassle fiddling with
bolts in and out numerous times to get this set right, so here are my questions:
1) The TP18 has a rod end on it (TP18C). I seem to remember this is what I'll
use
to make adjustments. Will screwing that out (more threads showing) give me
more degress of upward travel as I need? Or should it be screwed in more?
2) Does the Main pitch push rod need to be adjusted also?
I know this may seem like a simple thing to figure out but I know someone's
bound
to have made a lot of these adjustments and has a simple way to get the right
results.
As always, your help is much appreciated. :D
Dan
Visit - www.EuropaOwners.org
|