Re: Europa-List: A question about post curing?

[Graham Singleton <grahamsingleton@btinternet.com>]

Rowland & Wilma Carson wrote:
>
> Fred - I had my control surfaces etc post-cured in my inspector's oven 
> before filling. As the epoxy in the filler is not going to contribute 
> any structural strength, I see no benefit in post-curing it.. Rowland
Rowland
there might be a slight advantage in post curing the filler, it will be 
harder. It might also pre shrink it, so sand flatter, and maybe the 
weave won't show through after a few months.
Graham