Hi Graham,
I have made some small slots (12) into the instrument panel module
(about
3x15 mm) and inside of that panel a tunnel cover with a 2=94 tube end
for the
silicone rubber hose. My heat exchanger box (fresh air from cowling
front
inlet with 2=94 silicone rubber tube) is using hot water from the
engine,
running through light weight oil cooler.
A flap inside the firewall, operating by a bowden cable, opens or closes
the
warm air.
Please see attached picture.
Best Regards,
Bruno
-----Urspr=FCngliche Nachricht-----
Von: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] Im Auftrag von Graham
Higgins
Gesendet: Sonntag, 15. Februar 2009 00:02
An: Matronics List
Betreff: Europa-List: Windscreen Demister
<ghiggins@cirruscomms.com.au>
Hi Europaphiles,
Has anyone felt the need for a demisting system in their Europa? If so,
under what conditions?
Has anyone who has devised a cabin heating system included demisting as
part
of this?
Have you ever used it in anger?
I am considering my cabin heating system from the hot air at the back of
the
radiator, and wondering if I should include any demisting while on the
job -
don't want to have to come back later to do it.
Regards Graham Higgins, #261 in Oz
|