Those points are used for the attachment of part of the prop control
system with the Arplast prop and are hidden if the cooling shroud is
fitted.
I used a threaded lug next to the rocker cover on the rear righthand
(looking from the cockpit) cylinder.
Simon
On 17 Mar 2009, at 18:17, ivor.phillips@ntlworld.com wrote:
>
> hi Ferg
> I used the large threaded holes on top of the engine just behind the
> Vacuum pump,
> These are used to lift the engine at its point of balance, If you
> use a good quality welding cable with swaged joints it would be a
> fit and forget item,,
> regards
> ivor
> ---- Fergus Kyle <VE3LVO@rac.ca> wrote:
>> Cheers,
>> I may have made a tactical error - in running the grounding strap
>> from my 'forest-of-tabs' on the firewall to an M6x16 bolt holding
>> the
>> plastic ignition cover on the back of the engine. Admittedly, the
>> bolt
>> threads into the ignition housing but now I'm having nervous
>> thoughts about
>> the cover.
>> Where did you ground your strap to the engine?
>> Thanks, ferg
>> Europa A064
>> Wiring wiring wiring
>>
>
>
|