Hi Ron
I installed it behind the D-panel on the middle of the lower fuselage
side bottom just front of the the mass balance arm support. I made a
rigid aluminium installation plate full of lightening holes, leveled it
carefully by all axis and glued it to the fuselage by Sica mass (!).
Remote magnetometer was fixed to it by nylon screws. Dynon OAT sensor is
also there, looking through the belly like Comant transponder antenna as
well. They all work well (but those underside probes and antennas are
easy to broke when loading the mono plane to the trailer...).
Wishes, Raimo OH-XRT
Finland
----- Original Message -----
From: rparigor@suffolk.lib.ny.us
To: Graham
Sent: Monday, March 23, 2009 6:39 PM
Subject: Europa-List: What magnitometer location have you chosen?
I have a Dynon D10A with remote magnitometer and am looking for a
location for it.
Last night I borrowed Waynes sailboat compass and placed it on ceiling
between door hinges. When pilot gets in with headsets on, it swings bout
1 degree. When co-pilot gets in with headsets on it swings another 2
degrees for atotal of 3 degrees.
What location have you chosen for remote magnitometer?
If between door hinges what deviation do you find? I have Lightspeed
30G headsets.
Thx.
Ron Parigoris
|