craig bastin wrote:
>
> I had an issue with my cs07's being non-concentric, which i discovered after
> making the cs06 captive, with the sticks binding at extremes of travel. The
> runout
> did seem to be about the same on both. If yours is excessively free, maybe you
> could reach a compromise by deliberately mis-aligning the bearing very very
> slightly,
> which is basically the reverse of what I did to free mine up.
>
> craig
>
Hi Craig,
A misalignment of about 1 in 50 would be required, about 2 or 3 mm end
to end. A bit much and not much bearing surface then.
A possibility but I am not enthousiastic.
Jan
|