Jeff, I would recommend gel coat and in particular Swabilec - sprayed and
then rubbed down to a perfect finish with wet & dry. It is what most racing
gliders are finished with and they of course look for the ultimate finish on
their laminar flow surfaces. Regards, David Joyce, G-XSDJ.
----- Original Message -----
From: "Jeffrey J Paris" <jeffrey-j-paris@excite.com>
Sent: Thursday, September 17, 2009 5:02 PM
Subject: Europa-List: Paint Brands Suggentions for composite Aircraft
Dear Europa Gurus,
Any suggestions on what brand of paint product works best for our airframes?
I have used these products in the past on othe Airplane projects:
My Zenith Zodiac-Akzo Nobel-epoxy primer and 2 part Polyurethane wished for
better results
My friend's RV-6-PPG epoxy primer and 2 part Polyurethane- Nice product to
work with and nice results
My friends Sonex-Stewart Systems Water based 2 Part Polyurethane-A BITCH to
work with. Results good after a great deal of fussing/Re-do's.
Thanks for your time and consideration.
Jeff Paris Jab 3300 Kit #A012 Europa Monowheel Classic Dynon D180 1920 hours
into the project
------------------------------------------------------------
Click to reduce wrinkles & lines. Anti-aging that works, try now.
Anti-Wrinkle Products
http://tagline.excite.com/fc/FgElN1gzklyIMaOuxbfJp0YCHs05OC7kN6e2Olj9XdMW9rCHbeDa4PtUs96/
|