JonSmith wrote:
> <jonsmitheuropa@tiscali.co.uk>
>
> Thanks for the suggestions everyone. I'm going to have another go
> tonight with a little heat and effort to start with!! Yes (Bob) the
> wings are pinned together OFF the aircraft, but the only difficulty
> with using jacks etc on the spar ends is that the rigging cup is
> bonded on the port wing thus the stbd wing's spar tip is hidden
> within!! Cheers, Jon
You could drill a large hole through the rigging cup so you can use a
bolt as a push rod. Heating the cup and temporarily removing it is
another non-critical thing you could do.
Succes!
Frans
|