Hi Ian!
Since the directions on the company site are sketchy, I would
include the warning about tensioning one side before the second
is hung!
I found the AN5 bolts helpful without them creating a detectable set in the
springs. I used 5 or 6 of the 13 bolts per spring.
Bud Yerly also has additional suggestions including fabricating a
0.016" stainless or aluminum shield over the top of the top bar
and under the bottom to prevent scoring.
--------
Ira N224XS
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=275513#275513
|