Hi all
A bit more help needed
My trigear (under construction) is fitted with the original factory
finger brake conversion.
An earlier post suggested these were from Jamer Performance and fitted
with Buna N seals.
The earlier post suggested that Dot 3,5,or 8 specification would be OK
but the present Jamer site only lists DOT 3 or 4.
The other brake parts (calipers and parking brake valve) seem to be from
Matco who only recommend Mil-H-5606 although DOT 5 has been suggested
elsewhere.
So I am a bit confused and any guidance would be appreciated.
Regards
David Steade
|