<<<<<<<< What is your favorite location to place senderto detect OAT?
>>>>>>>>
Hi Ron,
With the 914, I had the OAT probe protuding behind the lower right NACA
air intake.
With the 912S I installed it inside the round air intake to the cylinder
cooling air guide.
In both cases the probe can be fitted so that it is not necessary to
remove it nor disconnect the wiring when you remove the lower cowling.
Both work very well in flight (I crossed checked the indicated temp
with a thermometer temporary fitted through one of the cockpit vents).
However, while on the ground, the temp is too much influenced by the
engine heat and therefore is not usable.
Remi Guerner
|