Gents,
Now that mod 75 and 76 are LAA/factory approved, If I can be of any
assistance in getting the Trio kit into your aircraft, please contact me
off line.
Paul Mitchell
Trio UK agent
----- Original Message -----
From: Philip Levi
To: europa-list@matronics.com
Sent: Wednesday, March 17, 2010 8:18 AM
Subject: Re: Europa-List: Autopilot Servo Location
Martin
One of the best altitude hold (dual axis) autopilots is the Trio Pilot
Pro. Excellent full details are on the Trio web site.
I was in correspondence with Paul Mitchell, the UK agent for Trio last
December and he was in touch with Andy Draper of the UK Light Aircraft
Association which were in the process of giving it approval for the
Europa. The relevant correspondence copied to me was:
----- Original Message -----
From: Andy Draper
To: Paul Mitchell
Sent: Wednesday, December 02, 2009 11:22 AM
Subject: RE: PP into a Europa
Hi Paul,
Europa are on the verge of launching Mod 76 which covers the altitude
hold aspect (awaiting flight test results) and the wing leveller part is
covered by the recently introduced Mod 75. Mod 75 effectively replaces
SM10507 which has been around for a while now. They've opted for
in-house mods to cover the rest of the world.
Mods 75 and 76 will be treated as Facory Options now, but both will
require inspection checks and flight test autorised by LAA Engineering
issued PFRC (as laid down in the mod leaflets).
Andy
From: Paul Mitchell [mailto:pm@tecnam.co.uk]
Sent: 02 December 2009 10:59
To: Andy Draper
Subject: PP into a Europa
Andy,
What is the currant position in fitting a PP into a Europa.Is it a
standard mod yet.
Any info gratefully received.
Paul
Note the reference to in-house mods for the rest of the world.
You will find it is a very neat and light weight unit at modest cost
compared to the competition. However, I do not speak from experience.
I plan to purchase it probably later this year after it has been
approved by the LAA.
Philip Levi
G-BWWB Monowheel Classic.
E-mail: pjlevi@gmail.com
On 17 March 2010 05:30, Martin Tuck <MJKTuck@cs.com> wrote:
Hi Folks,
I'm still considering a panel refurb - out with the pneumatic system
and in with an EFIS - I really like the Dynon Skyview.
Anyone installed autopilot servos? I think I've seen some roll
servos installed under the seat but I've not seen pitch servo
installation.
Does anyone have any drawings/photos?
Regards,
Martin Tuck
:
opa-List"
target="_blank">http://www.matronics.com/Navigator?Europa-List<===
============
= --> h
a href="http://www.matronics.com/contribution";
target="_blank">http://www.matronics.com/contribution
==========
|