Hi Everybody=2C
I have almost ready to fly test a Europa monowheel with Jabiru 3300 and Aer
ocarb. the trottle systems is liske CESSNA but it did nto work well=2C to s
hort from close to full open and not acuracy. any suggestion for other kind
of system ? (may be throttle system by aerocarb)
regards from Argentina=2C
GUSTAVO
> Date: Fri=2C 17 Sep 2010 09:45:36 +0100
> Subject: Re: Europa-List: Throttle cables
> From: europa@pstewart.f2s.com
> To: europa-list@matronics.com
>
>
> Jon
>
> The cables are notoriously sticky and can give rise to difficulty with ca
rb
> balancing. Some have replaced with piano wire. On advice from Conrad Beal
> (ConAir) we lubricated with ACF 50 and the cables run reasonably smoothly
.
> Don't rely on the carb springs to overcome much stickiness=2C they're not
very
> powerful.
>
> Other useful advice from Conrad was make the throttle cable runs as smoot
h
> an arc as possible=2C mirrored L & R and well secured so that the outer d
oes
> not move when actuating the throttle.
>
>
> Regards
>
> Paul
> G-GIDY (awaiting permit to test!!)
>
>
> On 17/9/10 08:14=2C "JonSmith" <jonsmitheuropa@tiscali.co.uk> wrote:
>
o.uk>
> >
> > Hi all=2C just a quick question. Should the stranded wire throttle cab
les be
> > lubricated in any way or left dry? I'm in the process of fitting a Rot
ax
> > (changing to a Rotax from an alternative engine type) and am about to b
olt the
> > throttle box and cables into the plane. Having fitted the cables into
the
> > throttle box they seem slightly stiff to move=2C but admittedly they ar
e not yet
> > connected to the carb throttle spring which should help them to open be
tter.
> > I'm sure this has been covered a thousand times before but it's new to
me so
> > many thanks in advance...!
> > Jon
> >
> > --------
> > G-TERN
> > Classic Mono
> >
> >
> >
> >
> > Read this topic online here:
> >
> > http://forums.matronics.com/viewtopic.php?p=312720#312720
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
===========
===========
===========
===========
>
>
>
|