europa-list
[Top] [All Lists]

RE: Europa-List: Rotax fuel flow detection

Subject: RE: Europa-List: Rotax fuel flow detection
From: Karl Heindl <kheindl@msn.com>
Date: Fri, 22 Oct 2010 21:06:18

Remi=2C
I tried just that. It does not work. The fuel flow at that point is not smo
oth and you get very erratic readings. Only John Wigney managed to get it t
o work with a pulsation damper.I tried that too=2C but with little improvem
ent. So I will also have to buy another Floscan transducer. The price at AC
S is as good or as bad as any.
Karl


> From: air.guerner@orange.fr
> Subject: Europa-List: Rotax fuel flow detection
> Date: Fri=2C 22 Oct 2010 19:53:24 +0200
> To: europa-list@matronics.com
> 
> 
> Thank you Ian for posting the LAA mod.
> 
> I have not installed a fuel flow in my aircraft but if I had to=2C I  
> would use the attached schematic which allows measuring the flow to  
> the carbs with a single sensor=2C therefore improving accuracy and  
> reliability and reducing cost.
> 
> The same principle can be used for the 914. In that case the single  
> flow sensor would be installed between the pressure regulator and the  
> carbs.
> 
> Remi Guerner
> F-PGKL
                                          


<Prev in Thread] Current Thread [Next in Thread>