Fred,
I bought a Harbor Freight gun and drilled it out. Worked fine.
If your primer matches the base color of the zolatone, you won't have to
spray as much. The zolatone is heavy if you spray it thick.
Kevin
----- Original Message -----
From: "Fred Klein" <fklein@orcasonline.com>
Sent: Wednesday, October 27, 2010 3:51 PM
Subject: Europa-List: zolatone
>
> Hi...I note that zolatone recommends a 2.0 to 2.4mm nozzle in a
> pressure-feed type gun for spraying their multicolor material.
>
> I'm finding that, short of spending way more for a gun than I'd like to,
> the guns in my price range have 1.4mm to 1.8mm nozzles.
>
> Has anyone tried to enlarge the nozzle size of a spray gun
> successfully?...unsuccessfully?...in order to apply the zolatone
> multicolor material?
>
> My application is for cockpit interior which will not be covered w/
> fabric...I'm attracted to the multi-color-stuff as it seems to offer a
> good way to mask the CM seams and other irregularities...I've looked for
> but have not found any comparable spray can product at Home Depot or
> hardware stores.
>
> Recommendations from experience are most welcome.
>
> Thanks,
>
> Fred
>
>
>
|