Graeme & others,
I have decided to sell my Warp Drive prop with spinner, backing plate and
hardware.
It has a grand total of about 2 hours running time. Of that 1.5 hours are
actual
flying time. It's like new.
It is the 62 inch 3-Blade Standard Carbon Fiber with HP-L Hub, white tips & 9"
white fiberglass spinner/backing plate.
The HP-L hub is for the Rotax 912 & 914 engine.
Warp Drive ( http://www.warpdriveprops.com/ ) lists these at $785 for the prop
and $175 for the spinner/backing plate.
Plus $20/blade for the white tips, $55 for Rotax Mounting Hardware & $85 for
3/8"
crush plate.
That's $1160 new plus any shipping. I'll sell for US$910 (UK560 or 640) plus
shipping.
I'll be sure to include the blade protractor and instructions.
If you are interested, I documented the prop installation and set-up on my web
site Year #8 Q2 2009.
Check six,
Bob Borger
Europa Kit #A221 N914XL, XS Tri-Gear, Intercooled 914, Airmaster C/S Prop
http://www.europaowners.org/forums/gallery2.php?g2_itemId=60232
http://www.biplaneforumgallery.com/index.php?cat=10046
Europa Flying!
3705 Lynchburg Dr.
Corinth, TX 76208
Home: 940-497-2123
Cel: 817-992-1117
On Nov 4, 2010, at 15:50, graeme bird wrote:
>
> Has anyone purchased a warp drive prop recently, do they have to be ordered
> from
the US and if so does anyone know the shipping? presumably VAT is also paid
via the shipping company.
>
> Anyone have an HP-L hub to sell on?
>
> --------
> Graeme Bird
|