I'm thinking maybe either the sender is indicating low or the instrument
is reading low.
On initial start I get upwards of 65-70 psi before it settles to around
45 psi once it gets warm.
Just my 2c worth.
Martin Tuck
Europa N152MT
Wichita, KS
On 11/6/2010 12:27 PM, david park wrote:
> Just started my 912ULS for the first time after following the
> procedure for priming the oil system. I am getting oil pressure after
> start when it rises to 30 - 35 psi but then it falls to about 12psi
> and stays there. Anyone got any suggestions to get the oil pressure
> normal???
> Dave GLDVO
> *
>
> *
|