You should be fine. Before the final fit of the cowl, check the
clearance for that too.
Bud Yerly
Tech support.
----- Original Message -----
From: Steade<mailto:steade@btinternet.com>
To: europa-list@matronics.com<mailto:europa-list@matronics.com>
Sent: Monday, March 07, 2011 7:03 AM
Subject: Europa-List: Clearance oil cooler to nose leg
Hi All
I have just fitted the oil cooler into the duct on my tri-gear XS. To
improve the cooling I have lowered the cooler by two inches as suggested
in past posts.
The clearance between the steel tube of the nose leg and the bottom of
the radiator is now
3-1/4 inches and I'm wondering if this is enough.
If anyone has any experience in this area I would appreciate any
advice
Regards
David Steade
http://www.matronics.com/Navigator?Europa-List<http://www.matronics.com/N
avigator?Europa-List>
http://www.matronics.com/contribution<http://www.matronics.com/contributi
on>
|