Re: Europa-List: Exhaust clearance

[Jeff B <topglock@cox.net>]

David,

Mine was almost touching the bolt, so I simply dimpled the shield about 
1" diameter, and all is well...

Jeff - Baby Blue

On 3/7/2011 5:31 PM, Steade wrote:
> Hi All
> A bit more guidance please . Now I'm fitting the exhaust to my Tri-gear.
> Its the latest oval design. The heat shield on mine is very close to the
> nut on the sump banjo fitting.
> Is this normal? What sort of clearance are other builders getting in
> this area?
> Regards
> David Steade
>
> *
>
>
> *