Gustavo
Join the Jabiru Engine Matronics Forum and put your question there.
There is plenty of work being done.
Regards
Lance Sandford in OZ
On 04/11/2011 10:00 AM, Gustavo Sessarego wrote:
> thanks Pete,
>
> I have a uMONITOR and it works on Celcius.....!!
>
> thanks again
> GUS
>
> From: pjeffers@talktalk.net
> To: europa-list@matronics.com
> SubjecPete, t: RE: Europa-List: JABIRU 3300 BRAND NEW OVER TEMPERATURE
> DURING TAXI
> Date: Sun, 10 Apr 2011 20:17:43 +0100
>
> Hi Gustavo,
>
> Just one silly thought. If you bought the aircraft in the States your
> temperatures readouts would probably be set up in Farenheit units
> rather than centigrade. Check your units.
>
> Pete
>
> *From: * owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com] *On Behalf Of *Gustavo
> Sessarego
> *Sent:* 10 April 2011 18:03
> *To:* europa-list@matronics.com
> *Subject:* Europa-List: JABIRU 3300 BRAND NEW OVER TEMPERATURE DURING
> TAXI
>
> Hi Everybody,
>
> I am Gustavo from ARGENTINA and I bought 1 year ago an Europa xs
> monowhell 99 % complete with jabiru 3300 brand new and airmaster 3
> balde cs brand new.
>
> now is time to mout take the first test fly and I find out that during
> taxi engine temperature is 150 celcius at 1400 rpm so I richt the
> runway for take off run at 190 celcius so I must stop engine for
> proctection.
>
> Engine Manual says 150 maximun continues and 175 maximun.
>
> note: outside temperature was only 20 celcius
>
> Any advise.....?
>
> regards from Buenos Aires -Argentine
>
> *
> *
> *
> *
|