Europa-List: Radiator

[John Cliff <johnfcliff@googlemail.com>]

I am trying to fit the (water) radiator to the cooling duct [XS engine 
kit], but the radiator is not as wide as the duct.  If placed to one 
side of the duct there is a gap of about an inch at the other side.  The 
manuual says to attach the radiator to the side plates with short AN3 
bolts (and -4 nuts !), which clearly will not work.

Am I missing something here, are they all like that, do I have the right 
radiator (it in unmarked but about 315mm wide, just over 12"), or what ?

John Cliff
#0259