Europa-List: Mono landing gear

[Mike Gamble <mp.gamble@talktalk.net>]

On assembly The M8x100 bolts and their nyloc nuts were tightened to 
bring
the upper and lower plates LG05 and07 together until their upper and 
lower
bushes were 5 =BC=92=92 apart. I now notice that, with the aircraft 
weight on the
wheel, there is a gap of about =BD=92=92 between the lower plate and the 
nut. I
suppose that this is to be expected as the polyurethane block compresses 
but
are others seeing the same amount of slack here?


Mike

XS Mono

G-CFMP