William, Mine are brass bars pre-drilled to take bolts for ring terminals.
The positive one has a plastic cover over it. The system has worked well.
Unfortunately I can't remember where they came from! regards, David
----- Original Message -----
From: "William Daniell" <wdaniell@etb.net.co>
Sent: Friday, May 13, 2011 5:36 PM
Subject: Europa-List: Bus bar
>
> Can anyone send me a picture of their bus bar/advise me on the best
> option.
>
> The ones that come with the Europa wiring kit seem to be plastic domestic
> terminal blocks with one side (as it were) liked by wires/ring terminals
> (Crimped not soldered ;-)).
>
> the wiring seems to me to add another point of failure whereas a straight
> copper bar would eliminate this - indeed one of the crimped connections
> was
> not crimped and I had to redo it.
>
> Thanks
>
> Will
>
>
>
|