Mike
If you don't mind that would be a good idea. I will measure it and
photograph and you can have it back almost immediately
Ian
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Mike Gregory
Sent: 23 June 2011 09:39
Subject: RE: Europa-List: 65l Europa fuel tank
Ian,
If it would help you to build up a library of tank dimensions from different
vintages, I can bring you my 1996 tank (subsequently fluorinated by return
to the manufacturer) when I come to Bisley tomorrow.
Regards,
Mike
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of G-IANI
Sent: 22 June 2011 08:31
Subject: RE: Europa-List: 65l Europa fuel tank
David
I do not have an accurate CAD drawing of the tank. What I have is attached
as a PDF.
If you are going to take up Rowland's offer then I will be happy to produce
an accurate drawing from it.
Bear in mind that the tank has had slight changes with almost every
production batch. The changes I know about involve a ridge across the front
to reduce the bulging.
Ian Rickard G-IANI XS Trigear, 300hours
Europa Club Mods Specialist
e-mail g-iani@ntlworld.com
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of David Joyce
Sent: 21 June 2011 20:59
Subject: Europa-List: 65l Europa fuel tank
Good evening list
I am working on a little project that may benefit us all, does anyone have a
line drawing of the Europa 65L fuel tank that can be emailed to me, I also
need the dimensions if anyone can get a tank to do this I would be most
grateful, I need all the measurements, including depth of and dimensions of
the saddle part, width, height girth etc!
I look forward your response and to the power of the list....
Kindest regards
David Joyce
(the other one)
|