Hi All,
Yes, I use one all the time at the hangar. I have two. The first one I found on
Ebay. Had to put a toggle switch on it the first time I used it. The cheap
rocker
type fell apart. I reduxed an aspirin bottle top portion on top so I would
have the cap there in case I needed to service the switch. Then I ran the wires
down to where the original switch contacts were. The reason fuel runs down
the outside of the shaft is that its a bypass port of some kind. The second unit
was given to me by a former hangar mate. It is just an inch or so short of
reaching the bottom of my 5 gallon can and haven't used it yet. In any case,
I must still set the can on the wing cause I haven't tried to lengthen the hose
yet. Probably won't pump as strong from the ground.
Troy
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=349299#349299
|
