sblack wrote:
> I have the mgl ff1 and the ft60 red cube and there is a snag. The ft60 has a
k factor of 68000 but the ff1 only allows k factors up to 60000! Have you dealt
with this Ian?
Resurrecting an old thread, I know, but I just found this after a Google search
for info on using an FT-60 Red Cube with an FF-1. The MGL website has info on
setting the right K-factor when using the FT-60:
http://www.mglavionics.com/Red_Cube_Instructions.pdf
> The EI manual lists the K-factor of the FT-60 at 68,000 pulses per Gallon.
> Since
the MGL Avionics system uses a liters K-factor, this value has to be divided
by 3.785 (Gallon/Liter ratio).
> Use the following in the setup:
> K-Factor: 18,000
> (Every FT-60 has the same K-factor)
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=356215#356215
|