Hi Richard
I have fitted silicone hoses all around with heat-sleeve
http://www.adlinsulflex.com/firesleeve/pyreflect-sleeve
Silicone hose from Forge Motorsport,
I used CTC clips from a GM/Opel car ( part no 90572595) because the
original Rotax clips Wouldn=92t go over the heat sleeve very easily,
But all my hoses wouldn=92t Leak unpressurised even without the clips, so
I
would look
at a damaged hose Or foreign matter between rubber hose and metal outlet,
Best wishes
Ivor
On 7 January 2012 15:27, Robert Borger <rlborger@mac.com> wrote:
> Hi Paul,
>
> Could you provide a McMaster part number or spec for those clips. I'm
> sure there's plenty of folks who would be interested in them.
>
> Blue skies & tailwinds,
> Bob Borger
> Europa XS Tri, Rotax 914, Airmaster C/S Prop.
> Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP
> 3705 Lynchburg Dr.
> Corinth, TX 76208-5331
> Cel: 817-992-1117
> rlborger@mac.com
>
> On Jan 7, 2012, at 8:48 AM, Paul McAllister wrote:
>
> Hi Richard,
>
> I have CTC clips on all of my coolant hoses including the big ones to the
> radiator and they work fine. I believe that Rotax fit CTC clips as
> standard on new engines these days.
>
> The only thing I can offer is that when I was looking for some odd ball
> CTC clips that I bought some from a supplier in Canada who imported them
> from Korea and they were pretty much weaker than the ones I purchased fro
m
> McMasters here in the US.
>
> Paul
>
>
|