Hi Europa Family,
I have installed the smart engine in my Monowheel XS.
This engine is made by Mercedes-Brabus with Turbo.
The engine is electronically controlled by the so called smart-MIP
System.
More Info you will find - also in English - under: www.ecofly.de
<http://www.ecofly.de/> and www.schicke-electronic.de
<http://www.schicke-electronic.de/>
I paid complete with engine frame, all accessories (but used a water
cooler
---From a Kawasaki 1200 and they changed the operating panel according to
my
drawing) and the smart-MIP system around 11.000 EUR.
When the engine is finished after about 2.000 operating hours, you just
get
a new smart/Mercedes engine for about 4.500 EUR (Ecofly will do the
change
for you-if you like).
Today we made some ground tests by -4=B0C and a static thrust test by
Warp
Drive setting on 14=B0 (best cruise). The max. engine rpm was 4.500, but
the
engine can do as maximum 5.800 rpm.
The static thrust test was measured by a digital spring scale and was
showing 145 kp, so now we will change the blade setting to 12=B0. Our
aim is
to get 180-200 kp.
More info later, if you like.
Best Regards,
Bruno Reith
-----Urspr=FCngliche Nachricht-----
Von: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] Im Auftrag von Kevin
Kedward
Gesendet: Freitag, 27. Januar 2012 21:11
An: Europa-List@matronics.com
Betreff: Europa-List: Smart
Hi Guys, What happened to the Smart car engine installation ?
Regards
Kevin
Sent from my iPhone
|