Perhaps some testing would be a good idea.
The sheaths I installed during the build have performed perfectly for nearly
400hours now.
Kevin
On Feb 1, 2012, at 6:54 AM, "G-IANI" <g-iani@ntlworld.com> wrote:
> Kevin
>
> Teflon lined cable sheath is very nice and smooth but I would be cautious a
bout using it. I had some installed on my heater inlet valve (above and beh
ind the radiator duct, so not near the exhaust). At some stage the Teflon m
elted and locked the cable solid. Not something you would want to happen on
a throttle cable. It could be that the cable I used was sub standard.
>
> Ian Rickard G-IANI XS Trigear, 300hours
> Europa Club Mods Specialist
> e-mail g-iani@ntlworld.com
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
|