On the subject,
If the cover is just to prevent fod entering the hole surely a simple piece of
alloy, drilled and fitted on to the studs is all that is required? I went for
all electric and that is what i have done . Dave
Sent from my iPhone
On 3 Feb 2012, at 21:37, "Robert Borger" <rlborger@mac.com> wrote:
>
> Juergen,
>
> No problem! I just wanted to make sure folks knew that the best parts
> available
were discussed with Lockwood.
>
> My engine is also from 2004. Yes, one must be careful when ordering any
> accessory
that connects to the back of the gearbox. There have been changes to the
accessory pad over the years.
>
> Blue skies & tailwinds,
> Bob Borger
> Europa XS Tri, Rotax 914, Airmaster C/S Prop.
> Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP
> 3705 Lynchburg Dr.
> Corinth, TX 76208-5331
> Cel: 817-992-1117
> rlborger@mac.com
>
> On Feb 3, 2012, at 2:38 PM, europapa wrote:
>
>>
>> Sorry Bob,
>>
>> didn't want to blame anybody.
>> My engine is from 2004.
>> That means you have to be careful when ordering a vacuum pump.
>>
>> Juergen
>
>
>
>
|