Hi Fran
Yes the internal Diameter is 1 inch and i have replaced mine with the same
hose they use on petrol Station forecourts,
the walls are over a 1/4 inch thick so its quite a job getting them in
place using hot water to soften them, But it gives me peace of mind being
at the lowest part of the tank,
I know pressure doesn't come into it but the hose is rated at 150 PSI and
very good quality, i Did give all this information to Andy
draper at the LAA so he may well have it, i will look back through my
records when i get the chance, i believe it was a company
called Hose world,
best wishes
Ivor
On 20 February 2012 21:02, Frans Veldman <frans@privatepilots.nl> wrote:
>
> Oops, I forgot to change the subject when I posted the message below.
> Please disregard it in the other thread.
>
> > Hi everyone,
> >
> > I just started the annual check. I noticed that the hose that connects
> > the two tank outlets with the outleg sockets has deteriorated.
> > Has anyone found a better material for this purpose than just rubber
> hose?
> >
> > What about the oil grade silicone hoses? Would that stand ethanol
> > blended fuel?
> >
> > Can anyone confirm that the hose required has an inner diameter of 25mm
> > (1 inch)?
> >
> > Thanks,
> > Frans
>
>
|