Steve
Probably overkill but i ran two breathers from the cobra both from the top,
the main one is in 3/8 metal from a large non return valve down the fuselage
side and exits just in front of the flap behind the wing, the second vent
is run
in 1/4 aluminium down to the rear baggage bay and across the middle and
through the floor to exit facing slightly rearwards, Nether pipe appear to
vent fuel in
flight only on the ground if overfilled,
regards
Ivor Phillips
G-IVER
On 22 April 2012 18:19, stephen vestuti <s.vestuti@gmail.com> wrote:
>
> Hi,
>
> I intend to exit the filler neck vent under the fuselage, does it need to
> face forward to airflow ( using 90 Deg. bend ), straight down or
> turned aft ? Or does it make no difference ?
>
>
> Steve.
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=371498#371498
>
>
|