Hi Paul
Just a suggestion, if you don't want to risk gluing up your clecoes, small
self tapping screws work just as well. Pop them in a paper cup and give
them a good spray of WD40 before use.
Pete
PS David is quite correct it is a 2 man (sorry person!) job.
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of David Joyce
Sent: 20 June 2012 18:53
Subject: Re: Europa-List: bonding fuselage top
Paul, What you really need is an extra pair of educated
hands (I.e. another builder) it is more a question of
getting it all spread on all the mating surfaces before it
begins to go off. Making a bit extra if needs be would be
a minor part of it. Do you have another builder living
nearby who could come and help? I assume you have got it
all lined up with cllecoes to hold it in position and that
you will cover the clecoes with grease to help get them
out when the resin is set but not brittle.
Regards, David Joyce, G-XSDJ
"Paul & Vanessa Munford" <pmdental@btinternet.com>
wrote:
> Hi guys, Paul Munford here, kit 625 tri gear NG. I'm
>soon to bond the fuselage top & was wondering just how
>much resin to mix ??? Anyone out there done this job
>recently ? Also any tips on mixing large amounts of resin
>& flox for this job. Thanx in advance.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
|