Paul, some suggestion, do it with your room as cool as possible to give the
process
as much time without the glue going off. Rehearse the process first with
several helpers. Don't try to mix the whole amount in one batch/container so
as to be too hard to handle. If you have glued with redux before, you know how
thick to get the glue with the flox. It is important not to be too thin or
too thick. You probably aren't but don't use screws as they suck the skins down
too tight leaving an indentation at each screw which has to be filled later.
Scrape off extra glue that oozes out of seam but don't unduly disturb the
fuselage skins in doing so.
Bill
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=376242#376242
|