Nev,
I can test fit it to my classic if you want along with those cowls ;)
Vince
G-BWUP
ULPowered tail wheel Europa
Sent from my iPad
On 10 Jul 2012, at 22:06, Neville Eyre <neveyre@aol.co.uk> wrote:
> Update chaps,
> 2nd prototype to hand now, who wants to see if it fits [ the Classic I had
to hand has gone from my Workshop] This one is final spec' material, good t
o go.
> Cheers,
> Nev.
>
>
> -----Original Message-----
> From: Neville Eyre <neveyre@aol.co.uk>
> To: europa-list <europa-list@matronics.com>
> Sent: Wed, Mar 14, 2012 7:24 pm
> Subject: Re: Europa-List: batch of classic fuel filler pipes being made
>
> Right, update;
> I gave up on the three manufacturers I asked to bid on before, no wonder a
ll the work is going to China !
> Found someone [ a mate] to do the job, I need to know is how many are inte
rested in this first batch.
> I intend to keep a bunch in stock later, as ALL Classic Europa's are going
to need one sooner or later, I have inspected 3 recently for Permit Renewal
, all getting close to being too far gone.
> Europa are not going to get any more rubber hoses made.
> The pipes will be from 6023 [ heat treated to T3 condition after bending i
n the T 0 state] with rolled beads on each end. Tags on both ends to ground [
earth] to filler cap and ground circuit.
> Will be a ''new'' Mod with the LAA as we can't use Franks Mod if there is t
he SLIGHTEST deviation.Frank used 6063 T6 [ YES T6 !] How did he bend that ?
So different material spec needs a new Mod ! ?
> Will be a complete Kit with all connecting hoses, clips, wire etc.....
> I will have a firm price in a week or so, best guess at the moment for the
pipe only is about =C2=A3115 / =C2=A3120, but that depends on the number ? L
ooking at the cost of the other items at the moment.
> Best to ship [ especially to overseas] in multiples, as they will be big [
odd shape] can't be folded up like the rubber ones were ! ? [ mind, I expec
t Maureen would have tried !]
> So, who wants one in about 3 to 4 weeks ?
> I have had a pipe made from gash steel to trial fit, [ got 3 Europa's to c
heck with, all slightly different !] if / when I get the go ahead from enoug
h of you I will be ready to do sets for real in the alloy.
> Looks like a win / win situation going to alloy, wont get the stink throug
h the poor quality rubber, and it will be lighter. Also got a ''cunning plan
'' to aid faster filling, will report back on that later.
> So Guys, show me your money !
> Nev
>
>
> -----Original Message-----
> From: Neville Eyre <neveyre@aol.co.uk>
> To: europa-list <europa-list@matronics.com>
> Sent: Mon, 5 Mar 2012 22:47
> Subject: Re: Europa-List: batch of classic fuel filler pipes being made
>
> I started conversations with 3 potential manufactures a while back, confes
s I have let it slip, will look back into it this week and report back.
> Cheers,
> Nev.
>
>
> -----Original Message-----
> From: graeme bird <graeme@gdbmk.co.uk>
> To: europa-list <europa-list@matronics.com>
> Sent: Sun, 4 Mar 2012 13:33
> Subject: Europa-List: batch of classic fuel filler pipes being made
>
>
> I am thinking of getting a batch of aluminum fuel filler pipes made for th
e
> classic to replace the rubber trunk. Frank Mycroft sent me a drawing and h
as had
> the mod approved ( it may be with Ian as well).
>
> a) does anyone else want one making, they would be cheaper in a batch
> b) I can enquire locally but pointers as to where they could be made in th
e UK
> would be helpful (50mm x 1.5 pipe)
>
> Regards Graeme
>
> --------
> Graeme Bird
> G-UMPY
> Mono Classic/XS FWFD 912ULS/Warp drive FP
> Just competed conversion to type
> G@gdbmk.co.uk
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=367709#367709
>
>
>
>
>
>
>
> arget=_blank>http://www.matronics.com/Navigator?Europa-List
> p://forums.matronics.com
> blank>http://www.matronics.com/contribution
>
>
>
>
>
> arget=_blank>http://www.matronics.com/Navigator?Europa-List
> p://forums.matronics.com
> blank>http://www.matronics.com/contribution
>
>
>
> arget=_blank>http://www.matronics.com/Navigator?Europa-List
> p://forums.matronics.com
> blank>http://www.matronics.com/contribution
>
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
|