Hi Jon
My crack ran along the inside of the bend along the length of the pipe,
rather than round it. It is noticeable that the crack is just along the
bottom of the weld for the exhaust spring, though if that is anything to do
with the problem I could not say.
We had fun with the CKT exhaust pipes last year 3 of the 4 flanges(?) where
they bolt to the heads cracked off. The replacements are considerably
better welded.
I dealt with CKT direct for my replacements. Chris Piper is the man to talk
to. 01884 242211 if you need the number.
Pete
PS I seem to remember G-TERN parked outside the hanger at Kemble?
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of JonSmith
Sent: 24 August 2012 19:20
Subject: Europa-List: Re: XS Exhaust System Cracks
Hi Pete, thanks for your reply. I should have said that mine already is an
XS version, stainless steel by CKT. On mine its both the rear pipes that
keep cracking (twice for both of them). The front ones have so far been ok.
Attached is a photo of one of the rear pipes - the other was similar.
Cheers, Jon
--------
G-TERN
Classic Mono
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=381713#381713
Attachments:
http://forums.matronics.com//files/crack_1_124.jpg
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
|