Michel=2C
Did you ever have a need to switch on the carb heat=2C or is it on permanen
tly ?I am contemplating removing mine again . It was only installed because
of regulations=2C and yet I notice that factory built aircraft in Canada d
on't have the heater.Karl
Date: Mon=2C 17 Sep 2012 21:38:12 +0200
From: mau11@free.fr
Subject: Re: Re: Europa-List: Re: Silicone Hoses for the Rotax 912 / 914
Hello=2C
I use carb heater on my 912 during 9 years=2C and now 4 years on my 912S th
e
durit is original supply by Skydrive=2C without problem.
It is not silicone durit.
Michel AUVRAY
From: Robert Borger
Date: 2012-09-17 20:36
Subject: Re: Europa-List: Re: Silicone Hoses for the Rotax 912
/ 914
Richard=2C
I do not have the carb heaters on my engine so I can not help with this que
stion.
I suggest you contact Stepahn Ingemarsson and ask him. Perhaps he can prov
ide additional hose if it is needed.
Blue skies & tailwinds=2C
Bob Borger
Europa XS Tri=2C Rotax 914=2C Airmaster C/S Prop.
Little Toot Sport Biplane=2C Lycoming Thunderbolt AEIO-320 EXP
3705 Lynchburg Dr.
Corinth=2C TX 76208-5331
Cel: 817-992-1117
rlborger@mac.com
On Sep 17=2C 2012=2C at 10:16 AM=2C RCC Sky Mail <richard.churchill-coleman
@sky.com> wrote:
sky.com>
Bob
Thanks for sharing all that learning. I am also contemplating the silicon h
oses and I have the add on carb heaters which require coolant water round t
heir jackets. Do you have those too and if so do you need extra hose to con
nect those or is there enough n the kit?
Richard CC
============
sp=3BThe Europa-List Email Forum -
avigator to browse
bsp=3BList Un/Subscription=2C
bsp=3BBrowse=2C Chat=2C FAQ=2C
?Europa-List
============
p=3B - MATRONICS WEB FORUMS -
=3Bvia the Web Forums!
============
p=3B - List Contribution Web Site -
=3Bsupport!
p=3B -Matt Dralle=2C List Admin.
ion
============
|