Remi,
Observing the waste gate lever and cable during the TCU test, it all appears to
be nice and free. Notwithstanding, I shall check the cable as you describe.
Thank you for taking the time to assist.
Kingsley
Sent from my iPhone
On 12/11/2012, at 6:34 PM, "Remi Guerner" <air.guerner@orange.fr> wrote:
>
> Kingsley,
> It seems your wastegate takes more time than normal to move to its position.
This may be caused by some undesirable friction in the system. I would first
investigate
this possible cause. I suggest you disconnect the waste gate bowden
cable at both ends and pull it back and forth. Move the waste gate lever back
and forth. Both should move easily. If they dont, some cleaning and lubrication
should solve the problem.
> Please let us know your findings. Good luck.
> Remi
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=387667#387667
>
>
>
>
>
>
>
>
>
>
|