If you don't correct this you will damage the sprag clutch=2C and that is e
xpensive.You need to do two things:Get the friction torque adjusted by a Ro
tax man to be the maximum allowable. For this you need to remove the gearbo
x.Second =2C you need to change the flywheel=2C should also be done by your
Rotax specialist. If you have a Classic this may mean having to loosen the
engine to get access to the back.
Cheers=2C
Karl
> Subject: Europa-List: Re: Ethanol Testing Kits
> From: alancarteresq@onetel.net
> Date: Fri=2C 14 Dec 2012 13:24:48 -0800
> To: europa-list@matronics.com
>
t>
>
> Hi Roland.
> i am having a lot of kick back on starting=2C due you have a new engine l
ater than 2000 =2C the later engines have 6 pins on the ignition system and
incorporate dual soft starts modules and the timing below 800 rpms is 3% a
fter TDC as opposed to the older engines of 4% Before TDC.
>
> Alan
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=390462#390462
>
>
>
>
>
>
>
===========
===========
===========
===========
>
>
>
|