Hi! Alain,
The name and address is at the bottom of Lee=99s message.
I=99ve copied the details here and substituted the International
Code in front of their phone numbers.
Don=99t remember having any problems over the attachment ball
which the others are involved with but I can=99t think that the
ball wears since it is steel, but the socket on the ram end being
plastic may need changing on a like for like basis which I think they do
on a re-gass event anyway, but ask them.
Regards
Bob Harrison \G-PTAG
James Godbold
Field Sales Manager
Industrial Gas Springs Ltd
Mobile 0044( 0)7768 490106 Direct 0044(0)20 8646 6596
ex702
=C2=AF james@igsltd.co.uk
Sales 0044(0)20 8646 6595 0044( 0)20 8646 6594
22 Wates Way, Mitcham, Surrey, CR4 4HR www.industrialgassprings.com
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Alain
Chabert
Sent: 13 April 2013 08:31
Subject: Re: Europa-List: Re: gas struts
Hi Bob,
Who is "the outfit" ?
I replaced mine with new one, but I kept the old.
Maybe I could re load them!
Regards
Alain CHABERT
e-mail : alainchabert@wanadoo.fr
Le 12/04/13 23:04, Bob Harrison a =C3=A9crit :
<mailto:ptag.dev@tiscali.co.uk> <ptag.dev@tiscali.co.uk>
Hi! All
Yes, that was the outfit who recharged my gas struts, quick turnround
and very obliging outfit.
Regards
Bob Harrison. G-PTAG
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of LeeVaughan
Sent: 12 April 2013 20:11
Subject: Europa-List: Re: gas struts
<mailto:vaughanrl@pella.com> <vaughanrl@pella.com>
I was looking for the same and sent the part number to the manufacturer
here's their reply:
The part number you have looks correct at GS 8699-1.
Our records show that this was supplied complete with end fittings.
If you could take a look at this link
http://www.industrialgassprings.com/uk/prod_info.asp?GS_No=F06-B
hopefully this is the ball joint you have?
If not could you please advise, there is a very slim chance that you
have an imperial thread rather than M5 stud.
If I can be of any further assistance please do contact me.
Best regards
James Godbold
Field Sales Manager
Industrial Gas Springs Ltd
Mobile 07768 490106 =C3=AF=82=AC=C2=A8 Direct 020 8646
6596 x702
=C3=AF=82=AC=C2=AF james@igsltd.co.uk
=C3=AF=82=AC=C2=A8 Sales 020 8646 6595 =C3=AF=C6=92=C5-
020 8646 6594
=C3=AF=82=AC=C2 22 Wates Way, Mitcham, Surrey, CR4 4HR
www.industrialgassprings.com
Also Bansbach has what I'm told is an exact replacement as well.
Item #AF641-104 Description: B3B3F46-100-300--001/165N for $101.34 I
ended up ordering this one and it has a 6 week lead time in the US. I
haven't received it yet. One thing to note at least on the cylinder I
have the end fittings are special in that it is an 8mm ball and imperial
threads 10-32 which no one admits to having.
Cheers,
Lee
--------
Lee
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=398520#398520
|