Hi There,
You need to push the liquid with a syringe from each brake through the
purge
bolt until it goes out of each master cylinder. To avoid having liquid
falls
everywhere you need to connect a special bolt on which you connect a
pipe
and get the exceeding in a bottle.
Max Cointe
<mailto:mcointe@free.fr> mcointe@free.fr
F-PMLH Europa XS_TriGear
Kit #560-2003 912ULS/AirmasterAP332 490 hours
F-PLDJ Dyn=92A=E9ro MCR 4S
Kit #27-2002 912ULSFR/MTProp MTV7A 1600 heures
De : owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] De la part de
f.kyle@sympatico.ca
Envoy=E9 : vendredi 4 octobre 2013 05:29
=C0 : 5EUROPALIST
Objet : Europa-List: DOT4 and filling the monowheel brake line
Cheers,
I am having the worst time trying to force the fluid up into
the
brake system from the bleed valve on the main wheel. We opened the
upper fill plug to relieve what we thought to be any resistance and with
a
syringe attempted to fill the various parts.
First of all the syringes leaked somewhat and we did our
best to
press fluid into the wheel portion but after 250 ml, and much huffing
and
puffing, have seen little result above, even though we induced a vacuum
from
the top to expedite matters..
Any hints or kinks as to a more perfect procedure? All ideas
accepted at par.
Thanks, Ferg
|