Graham
It rolls easy enough on concrete but it is both the outside edges of the tyr
es that are wearing.
Kevin
> On 29 Oct 2013, at 09:28, GRAHAM SINGLETON <grahamsingleton@btinternet.com
> wrote:
>
> Quite apaart from tyre manufacturer, wheel alighmnet is important, if the w
heels are toed in (or out) too much
> tyre wear and rolling resistance will be excessive. Is your airplane easy t
o push around on tarmac? That's what you are
>
> looking for.
> Graham
>
>
> From: Max Cointe (Free) <mcointe@free.fr>
> To: europa-list@matronics.com
> Sent: Tuesday, 29 October 2013, 8:44
> Subject: RE: Europa-List: Tyres for tri gear
>
>
> Kevin,
>
> Our ship came with Condors and they lasted flat to the weave after less th
an
> 200 landing on hard strip. We changed to Air Trainer which went used conic
al
> ?? very fast (~100 landing). And now we have Air Trac for few landing... M
y
> guess is: the cheaper are the best!
>
> Max Cointe
> mcointe@free.fr
> F-PMLH Europa XS_TriGear
> Kit #560-2003 912ULS/AirmasterAP332 490 hours
>
> F-PLDJ Dyn=99A=C3=A9ro MCR 4S
> Kit #27-2002 912ULSFR/MTProp MTV7A 1600 heures
>
>
> -----Message d'origine-----
> De : owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com] De la part de Jeff B
> Envoy=C3=A9 : lundi 28 octobre 2013 19:20
> =C3 : europa-list@matronics.com
> Objet : Re: Europa-List: Tyres for tri gear
>
>
> Kevin. I've used everything from the "el cheapo" to the most expensive
> Michelins. They all last about the same, as far as tread wear is concerne
d.
> I have the 6 ply Air Tracs on, now and they are doing fine...
>
> Jeff - Baby Blue
>
> On 10/28/2013 11:39 AM, Kevin Challis wrote:
> > --> <kevinmarie@blueyonder.co.uk>
> >
> > Hi
> >
> > Does anyone know the best tyres to use on the tri gear. The tyres I put o
n
> last time haven't lasted very well. I think they are Condors.
> >
> > Thanks
> >
> > Kevin Challis
> > G ODJG
> >
> >
> >
> >
> >
> >
> >
>
> < href="http://www.matronics.com/Navigator?Europa-List"; target="_blank
">p; -Matt Dralle, Libution" ======
>
>
>
>
>
>
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
|