Further to all the talk of relay decks, there is another way to allow more than
1 trim switch, available from the proprietor of this forum, Matt Dralle, in the
form of The Governor - here's a link to it:
http://www.matronics.com/governor/
Its primary function is to allow for the trim servo speed to be adjusted - I
understand
some folk have found the natural speed of the servo too high for their
liking - but as bonus you can add as many extra trim switches as you want. (eg
one on the panel and one on each stick-top.) I have fitted one to my trim
circuit
and in my tests so far (not yet flying) I find it is entirely satisfactory.
In the picture of my panel (I posted a link to it yesterday) the small hole
at bottom left adjacent to the trim switch is for screwdriver adjustment of
the trim speed.
in friendship
Rowland
| Rowland Carson ... that's Rowland with a 'w' ...
| <rowlandcarson@gmail.com> http://www.rowlandcarson.org.uk
| Skype, Twitter: rowland_carson Facebook: Rowland Carson
| pictures: http://picasaweb.google.com/rowlandcarson
|