I replaced the original with a locking cap from Europa a while ago because I
lost
the original!
It is not sealed I put a circle of vinyl (the type used for sign writing) over
the cap. It works but it is a bodge. If anyone comes up with a sealing cap for
the old classic filler please let me know.
Kevin Challis
> On 1 Sep 2014, at 19:02, "Bob Harrison" <ptag.dev@talktalk.net> wrote:
>
>
> Hi! All
> I changed my original cap for the locking version. Does this then mean that
> it will not now be sealed? I have had my suspicions! However Europa
> Aircraft supplied the locking cap so surely this issue was investigated and
> they should have spoken out ?
> Regards
> Bob Harrison. G-PTAG
>
> -----Original Message-----
> From: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com] On Behalf Of rampil
> Sent: 01 September 2014 16:29
> To: europa-list@matronics.com
> Subject: Europa-List: Re: Fuel Caps for the Europa Fleet.
>
>
> A little follow-up:
>
> While the twist locking mechanism on the 65 mm cap engages the old 70 mm
> flange, the O-ring does definitely NOT seal the down pipe. It is shy by at
> least
> 0.5 mm from the flange. I would not want to fly in rain with it ;)
>
> --------
> Ira N224XS
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=429766#429766
>
>
>
>
>
>
>
>
>
>
>
>
>
>
|