Phew thanks very much, I jut had a restless night with "leftover"
syndrome imagining where it should go.
this one turned up in my speed kit box which I dug out all covered with
dust and full of spiders having put it away nigh on 10 years ago...
I certainly already have the link rods so it must be an extra one.
Will
William Daniell
LONGPORT
+57 310 295 0744
On Sat, Jan 10, 2015 at 12:36 PM, Rowland Carson <rowlandcarson@gmail.com>
wrote:
m
> >
>
> On 10 Jan 2015, at 16:54, William Daniell <wdaniell.longport@gmail.com>
> wrote:
>
> > I have an aluminium tube TU 02 which I can identify. Does anyone know
> that this is for?
>
> William - if it=99s 2024 T3 - .5" x .035" x 28=9D then it
=99s TU2, which is cut
> into 2 pieces to make the aileron link rods which connect the outboard
> bellcrank to the aileron. See the Manual chapter 9 page 3.
>
> I have found it a bit annoying that the part numbering sometimes has a
> leading zero (eg EURO01) and sometimes does not. I guess whoever assigned
> the part numbers thought there might be less than 10 of the parts that
> don=99t have a leading zero. Not always consistent (eg TU1, TU2, TU
21RM,
> TU23RM). I couldn=99t initially find TU 02 or TU02 in my inventory
database,
> because it was called out as TU2.
>
> Hope this helps.
>
> in friendship
>
> Rowland
>
> | Rowland Carson ... that's Rowland with a 'w' ...
> | <rowlandcarson@gmail.com> http://www.rowlandcarson.org.uk
> | Skype, Twitter: rowland_carson Facebook: Rowland Carson
> | pictures: http://picasaweb.google.com/rowlandcarson
>
>
===========
===========
===========
===========
>
>
|