You're right, just measured it. Should have done it sooner!Graham
On Thursday, 11 February 2016, 14:46, Alan Twigg <alan.twigg775@gmail.c
om> wrote:
I think those are 75"Graham. I need 96"Alan
Sent from my iPad
On 28 Jan 2016, at 18:09, GRAHAM SINGLETON <grahamsingleton@btinternet.com>
wrote:
I think I have an old aileron push rod from a Classic. I'll check the lengt
h if you like?
Graham
On Thursday, 28 January 2016, 16:13, Alan Twigg <alan.twigg775@gmail.co
m> wrote:
I have just cut my pushrods to length, put end fitting into one and found a
dent 8" from the end of the other; yes I feel stupid as I cut 2 feet off t
he other end.
Upshot is I=C2- am looking for 95" of 1" ally tube. I have a 7 foot long
good bit.
I am in Oxfordshire UK.
Glider wing in final stages before paint.
href="http://www.matronics.com/contribution"; target="_blank">http://www
p; =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- -Matt Dra
ropa-List" target="_blank">http://www.matronics.com/Navigator?Europa-List
> http://foru=C2- =C2- =C2- =C2- =C2- =C2- - List Contribution
Web Site - http://www.matronic===============
====
|