Will,
I had the same situation (XS fuselage), but found that only the lower
horizontal seals caused the problem. I stayed with the original seals on
top and on the sides, replaced the lower seals by a thin version:
problem solved, the doors close easily.
Regards, Alfred
Von: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] Im Auftrag von William
Daniell
Gesendet: Donnerstag, 15. Dezember 2016 17:53
An: europa-list@matronics.com
Betreff: Europa-List: Door seals
I set up the doors and they open and close fine...nice tight fit and
flush.
Without the seal.
With the seal (without transparency) i have to lean most of my weight
down to get the shoot bolts in. This is obviously going to be hard with
the windows in and my concern is not engaging the rear bolt by mistake
causing the door to depart.
Had anybody had the same problem? I am thinking of finding an
alternative seal.
Will
|