Hi Pete,
I have read both.
I've also seen cowlings that have had their firewall face trimmed to
allow the aperture to align with the propeller hub.
As you say "it was a bit crude but seemed to work".
Nigel
Quoting Peter Jeffers <pjeffers@talktalk.net>:
>
> Hi Nigel,
> You obviously did not read either my message or the Classic build
> manual which states that the engine offset on the classic is
> achieved by adjusting the washers in order to align the prop with
> the cowlings. Inference is that the cowlings had the offset built
> into them.
> Pete
>
>
|