Hi Carl,
I fitted the springs I think it was 2009. I've had no
problems what so ever. the only thing I do every annual is make sure
there's plenty of grease around the top and bottom where they hook on to
the frame. fitting was a little tricky, had to expand the springs using
a jack and put bolts in the spring to keep expanded while fitting.
managed to do it on my own, so you shouldn't have any problem. hope this
helps.
Danny. G-C.E.R.I
On 10/02/2017 09:18, carlp101 wrote:
>
> Hi,
>
> My Europa is currently fitted with bungee cord on the nose wheel suspension,
but I also have the springs from Europa to replace it. Has anyone fitted the
springs?
Do they do a good job?
>
> I'm concerned that the springs concentrate the forces at two points on the
> nose
wheel frame rather than spreading it out as the bungee does. I'm wondering
if it's probably better to stick with what I already have fitted.
>
> Any experience / advise greatly appreciated.
>
> All the best.
> Carl
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=465959#465959
>
>
|